Skip to content

Local service ads for roofers: setup, job types and bad leads

Get Google Verified, switch off the roofing jobs you don't want, pace your budget for storm season and stop paying for leads Google won't credit.

Local service ads for roofers are Google's pay-per-lead ads. Your roofing company shows in Google Search and Maps with a Google Verified badge and your reviews, and you pay when a homeowner calls, messages or books, not when they click. To make them pay off, pass Google's screening, switch on only the roofing jobs you want, and answer every call.

Roofers usually lose money on these ads in 3 places: job types they don't do, missed calls that still get charged, and budgets that run dry in storm season. Here is each one as it works in November 2026. Comparing this with search ads? See our local service ads vs Google Ads post.

5 minute check: open your Leads page and go through your last 20 charged leads. Count the jobs you actually wanted, in areas you actually serve. The rest is money the settings below can save.

How local service ads for roofers work in 2026

Google Local Services Ads for roofers are keywordless. You pick job types and a service area, and Google matches you to searches. According to Google's page on how leads work, you pay for each valid lead:

  • A call you answer, or a customer you reach when you call back
  • A missed call during business hours where the caller stays on the line for more than 20 seconds
  • A text, email or voicemail
  • A booking request (US and Canada only)

Google is moving Local Services Ads into Google Ads as Performance Max campaigns with pay-per-lead goals. Roofing is in the first phase, from August 2026, for select US advertisers. Service-area businesses without a storefront, which describes many roofing companies, are scheduled for late 2026.

You still pay only for valid leads. Budgets, locations and service types move to Settings in Google Ads, and old performance reports don't carry over, so screenshot them when the administrator's notice email arrives, 14 days before the move.

How to get Google Guaranteed, now Google Verified, as a roofer

If you're looking for Google Guaranteed roofing status, the badge is gone. Google now issues a single Google Verified badge, and the Money Back Guarantee only covered bookings made before December 7, 2025. New advertisers earn the badge by passing screening.

So the real question behind "how to get Google Guaranteed for my business" is which checks apply to a roofer. Google's requirements by category list these for roofing:

  • Google Business Profile: a public, verified profile.
  • Background checks: a business check and an owner check, for select users.
  • Business registration: a business check and a business representative check, for select users.
  • Insurance: general liability, for select users. Your dashboard shows the amount required.
  • Licenses: state level business and owner licenses where local law requires them, for select users.

Some guides say every roofing field worker needs a background check. Google's roofing section lists only business and owner checks, without the extra service professional screening it lists for plumbing and HVAC. Your dashboard is the final word.

From Google's page on the screening process, the details that slow roofers down:

  1. Use the exact same business name on your Business Profile, insurance certificate, license and registration.
  2. Find your D-U-N-S number, or use a Secretary of State registration, an IRS EIN or a Department of Revenue registration. A new D-U-N-S application can take up to 30 days.
  3. Upload an insurance certificate in your business name (or with a DBA document) that shows a policy number and stays valid for 14 days after you submit it.
  4. Have the business representative ready with an unexpired government photo ID. Background checks are free and involve no credit check.
  5. Keep documents current. Missing a requested review can cost you the badge or pause your ads.
Paying for clicks that do not turn into calls?

Send your website and we will record a free 2 minute video on where your ad traffic leaks, with the 3 fixes we would make first.

Get my free video audit

Roofing job types: what to switch on and off

This setting decides which calls you pay for. The Google Ads API reference lists these job types for US roofers. Your dashboard may word them slightly differently.

Job typeLeave it on if
Roof installationYou do full replacements and new roofs. The US list has no separate replacement type.
Roof repairYou want leak, flashing and shingle repair work.
Roof inspectionYou charge for inspections, or free ones regularly turn into claims or reroofs.
Storm and wind damage roof repairYou handle insurance claim work and can reach new leads within days.
Gutter installation and repairYour own crews do gutters.
Skylight installation and repairYou do skylights in house.
Attic ventingYou would take a ventilation job on its own.
Other roofing workYou'll qualify odd jobs by phone.

This matters more now because Google no longer credits "job type not serviced" or "geo not serviced" leads. If gutter repair is on and you don't do gutters, you pay for those calls.

To edit job types and service areas:

  1. Sign in, open the menu at the top left and select Profile & Budget.
  2. On the Job types card, select the pencil icon, then the arrow next to your roofing industry.
  3. Toggle job types on or off and select Save.
  4. On the Service areas card, add counties, cities or zip codes, and exclude places you won't drive to.

Also check broad search on the Settings card. It is on by default, so you also show for general category searches. Google warns that turning it off can cut leads, so do it only if general searches mostly bring jobs you don't want.

Local service ads roofing cost per lead, and how to bid

Google doesn't publish a price list. Lead prices vary by location, job type, lead type and bidding mode, and message leads are usually priced lower than calls. What the job is worth to you is not on that list: a pipe boot repair and a full tear-off are each 1 lead.

For comparison, LocaliQ's 2025 home services benchmark, based on 3,211 US search campaigns from April 2024 to March 2025, put roofing and gutters at $228.15 per lead for search ads. Vendor figures for roofing Local Services Ads vary widely and rarely explain their data, so we don't repeat them. Your own numbers matter more, measured as spend divided by contracts signed. Our post on local service ads cost per lead shows how to read them.

Maximize leads, target cost per lead or max per lead

Google offers 3 bidding modes, set on the Budget card under Profile & budget:

  • Maximize leads: Google sets your bid to get the most leads for your budget. Google recommends it.
  • Target cost per lead: automated, with an optional target near what you expect to pay on average.
  • Max per lead: you set the most you will pay for a lead.

Google recommends a budget of at least 10 leads per week and says results take about 2 weeks to settle. Max per lead suits a roofer who wants fewer leads with a price cap, but Google Ads doesn't support manual bidding, so it goes away after the move.

Storm-season budget pacing

Your budget is an average. Google can spend more on a busy day, but you are never charged more than your monthly limit: your average daily budget times 30.4. Google lists a reached monthly budget as a reason ads stop running, and the same cap applies after the move to Google Ads. An early month hailstorm can use up much of that in a week or two. When a storm hits:

  • Raise the budget only if you can answer the extra calls and inspect within days.
  • Make sure the storm and wind damage job type is on.
  • Don't switch bidding modes mid-surge, since the system needs about 2 weeks to relearn.
  • Lower the budget once storm work slows.

See our guide to storm damage roofing leads.

Why answer rate decides where your roofing ad shows

Bid is only part of it. Google's page on ad rankings also weighs your responsiveness and your profile quality: rating, number of reviews, average response time, photos and completed verification. It says missed calls may hurt your responsiveness.

So a missed call costs you twice: you pay if the homeowner waits on the line more than 20 seconds during business hours, and it can count against your ranking. With the owner on a roof and the phone in the truck, fix it:

  • Set business hours to when someone can answer, not when crews work.
  • Forward calls to the office or an answering service during jobs.
  • Call back missed leads within minutes. You may already have paid for them.
  • Turn on message leads only if someone replies fast, since response time counts.
  • Ask every finished customer for a review. Reviews are managed in your Google Business Profile, and rating and review count affect your rank.

Storm chasers, sales calls and other bad leads

Roofing ads draw junk calls: agencies, lead sellers, out of town restoration crews wanting sub work, and homeowners 2 counties away. What happens to them:

  • Not charged: spam and duplicates Google filters out, callers who hang up at your phone menu, unanswered calls outside your hours, and repeat contact from the same customer within 15 days.
  • Credited later: Google reassesses charged leads over 30 days and can automatically credit low quality ones. The original charge still shows on your invoice.
  • Not credited: jobs you don't do and places you don't serve. Your settings are your only protection there.

Rate every lead, every week: open the menu, select Leads, choose the lead, then select Rate this lead in the top right corner and complete the survey. Google says it may occasionally credit leads you report as poor quality. A sales pitch is not a customer, so say so.

How LSA, your Business Profile and roofing pages work together

Local service ads for roofers don't run on their own. Your ad is matched to your Google Business Profile, where your reviews live. After the move to Google Ads, your name, address and hours sync one way from that profile, and significant name or address changes trigger a review, typically 24 to 48 hours, during which the campaign may pause. Don't rename or move your profile in storm season.

If a homeowner looks you up before signing for a new roof, your website should back up the badge with a page for each main service, real job photos and your license number. Those pages also give search ads a home for jobs that have no Local Services job type, like metal roofing.

If you also run search ads, or your account just moved and lead counts changed, have someone check job types, budgets and lead ratings weekly. That is part of our Google Ads management.

What to do next

This week, review your last 20 charged leads and switch off the job types and areas you don't want. Next, fix how calls get answered while crews are on roofs. Then rate every lead weekly and track cost per signed job, repairs and replacements apart.

Want a second look at the website homeowners see when they check you out? Send it to us and we'll record a free 2 minute video audit showing the 3 fixes we'd make first.

Common questions

Are Local Services Ads worth it for roofers?

They can be, if you pass Google's screening, keep reviews coming and someone answers the phone during business hours. You pay per lead, not per click, so wasted spend comes from wrong job types, missed calls and leads outside your area. Track cost per signed job, repairs and replacements apart, for a month or two before you decide.

How do I get Google Guaranteed for my roofing business?

Google replaced Google Guaranteed with a single Google Verified badge, and the money back guarantee only covered bookings made before December 7, 2025. To earn the badge, sign up for Local Services Ads, link a public, verified Google Business Profile, and pass the checks Google shows for roofing, such as background checks, insurance and licenses.

Do roofers need a background check for Local Services Ads?

Some do. Google's requirements page lists a business check and an owner check for roofers, both for select users, without the extra service professional screening it lists for plumbers and HVAC. Your dashboard shows which checks apply to you. The checks are free and don't involve a credit check.

How much do Local Services Ads cost for roofing?

Google doesn't publish a set price. Lead prices vary by location, job type, lead type and bidding mode, and message leads are usually cheaper than calls. You're never charged more than your monthly limit, which is your average daily budget times 30.4. Judge the cost by signed jobs, because a small repair and a full replacement are each 1 lead.

Can I get credit for a roofing lead outside my service area?

Not anymore. Google no longer credits leads for a job type you don't service or an area you don't serve, so your job type and service area settings are your protection. Google still filters spam and duplicates, reassesses charged leads and may credit leads you report as poor quality in the lead's survey.

Get your free video audit

The 3 fixes we'd make first on your site, within 1 business day.

Send my website
Free video auditWhatsApp